Art. No. 5071 TSM
Art. No. 5072 TSM
Art. No. 5073 TSM
Art. No. 5074 TSM
2 Installation, electrical connection and operation
2.1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons. The
applicable accident prevention regulations must be observed.
Failure to observe the instructions may cause damage to the device and result in fire and
other hazards.
Danger of electric shock. Make sure during the installation that there is always sufficient
insulation between the mains voltage and the bus. A minimum distance of at least 4 mm
must be maintained between bus conductors and mains voltage cores.
Use only the enclosed plastic screws for fastening to the supporting frame! Otherwise
safe operation cannot be ensured. Electrostatic discharges can cause defects in the
device.
Do not open device or operate it beyond the technical specification.
Page 5 of 39
Installation, electrical connection and operation
