Art. No. 5071 TSM
Art. No. 5072 TSM
Art. No. 5073 TSM
Art. No. 5074 TSM
4.2.4.2.2 Dimming function
For each rocker with the function set to "Dimming", the ETS indicates a 1-bit object and a 4-bit
object. Generally, the push button sensor transmits a switching telegram after a brief press and
a dimming telegram after a long press. In the standard parameterisation, the push button sensor
transmits a telegram for stopping the dimming action after a long press. The time needed by the
push button sensor to detect an actuation as a long actuation can be set in the parameters.
The status LEDs can be configured independently (see page 28).
The parameters "Command on pressing rocker..." specify which dimming command is
transmitted to the bus when a left or right button is pressed. The Standard push-button module
always transmits the dimming commands with a dimming step width of 100 %. A stop telegram
is transmitted at the end of the dimming operation (releasing the button).
Page 24 of 39
Software "Standard TSM 110x11"
Functional description
