Art. No. 5071 TSM
Art. No. 5072 TSM
Art. No. 5073 TSM
Art. No. 5074 TSM
2.5 Operation
Control surfaces
The standard pushbutton sensor modules consist of several control surfaces. The operation
concept can be configured in the ETS either as a rocker function or alternatively as a push
button function (only "Switching" function). With the rocker function, two neighbouring control
surfaces are combined into one rocker switch. In the pushbutton function, each control surface
is evaluated as single-surface operation.
The number of control surfaces depends on the push-button sensor used.
The Standard push-button modules have one red status LED for each rocker switch. The status
LEDs can be switched on or off permanently, or can function as a status indicator. As an
alternative, with the aid of separate communication objects, they can signal widely varying
display information completely independently of the push-button function, e.g. operation states
of lighting systems or room temperature controllers.
The operation LED can also signal the switching state of its own object, flash or be permanently
on or off. Besides functions that can be set using the ETS, the operation LED also indicates that
the push button sensor is in the programming mode for commissioning or diagnosis purposes.
i
Configuration of the control surfaces (button or rocker function) is described in detail in the
chapter "Software description"
Page 11 of 39
Installation, electrical connection and operation
