Art. No. 5071 TSM
Art. No. 5072 TSM
Art. No. 5073 TSM
Art. No. 5074 TSM
4.2.5 Parameters
Description
Values
Comment
h
General
Light period of status
LED for button-press
indicator
1 sec
2 sec
3 sec
4 sec
5 sec
This parameter defines the switch-on
time the status LED is lit up to indicate
actuation. The setting concerns all
status LEDs whose function is set to
"Button-press display".
Function of operation
LED
always OFF
always ON
This parameter defines the function of
the operation LED. The operation LED
can be switched permanently on or off.
Colour of the operation
LED
red
green
blue
The colour of the operation LED is
selected at this point.
This parameter is only visible when the
operation LED is switched-on.
i
When programming mode is active,
or a device is discharged, the
operation LED is always blue.
h
Operation concept
Operation concept of
buttons 1 and 2
(The same parameters
are available for the
other control surfaces /
button pairs.)
Rocker function (rocker
1)
Button function
For each respectively opposing buttons,
it can be set whether they are to be
used combined as a rocker switch with a
common basic function or as two
buttons with separate functions.
Depending on this setting, the ETS
displays different communication objects
and parameter pages.
h
Rocker switch 1 (buttons 1 / 2) (for operation concept "Rocker switch")
Function
Switching
Dimming
Venetian blind
Value transmitter 1-byte
Scene extension
This parameter is used to define the
basic function of the rocker. Depending
on this choice, the ETS displays
different communication objects and
parameters for this rocker.
Only for "Switching":
Command on pressing
left rocker
no reaction
ON
OFF
TOGGLE
These parameters specify the reaction
when the left rocker is pressed.
Page 32 of 39
Software "Standard TSM 110x11"
Parameters
