Art. No. 5071 TSM
Art. No. 5072 TSM
Art. No. 5073 TSM
Art. No. 5074 TSM
4.2 Software "Standard TSM 110x11"
4.2.1 Scope of functions
Scope of functions
-
Each control surface can be used as independent button or – when linked with the opposite
button – as a rocker function.
-
Each rocker can be used for the functions 'switching', 'dimming', 'blind/shutter', '1-byte
value transmitter' and 'scene extension'.
-
Each button can be used for the switching functions.
-
The switching function permits the following settings: reaction after pressing and/or
releasing, switch on, switch off, and toggle.
-
Dimming permits the following settings: times for short and long presses.
-
The shutter control permits the following settings: command on pressing (up, down,
TOGGLE), setting of times for short and long press and slat adjustment.
-
The 1-byte value transmitter function permits the following settings: selection of the value
range (0 … 100 %, 0 … 255), value on pressing.
-
Scene control permits the following settings: calling up or saving of external scenes using a
settable scene number (1...64).
-
Each rocker has one status LED of its own available. The Status LEDs are configured
independently of one another and can be switched on permanently, for orientation
purposes, or controlled for switching via a 1-bit communication object. The status LEDs can
also function as an operation indication as an option.
-
The operation LED can be switched permanently on or off. When the operation LED is
used, its colour can be configured in the ETS (red, green, blue).
-
To save energy, an energy-saving mode can be activated. If the energy-saving mode is
used, the signalling function of the device is switched off after a preset time without
operation or by an external telegram. The energy saving mode can be deactivated by an
operation or by a special telegram. Afterwards, the device is fully functional again.
Page 15 of 39
Software "Standard TSM 110x11"
Scope of functions
