Art. No. 5071 TSM
Art. No. 5072 TSM
Art. No. 5073 TSM
Art. No. 5074 TSM
4.2.4.1.2 Operation LED
Some of the functions of the operation LED of the pushbutton sensor modules are permanently
predefined internally:
-
In a non-programmed device (delivery state) or with an incorrectly-loaded application
program, this LED flashes at a slow frequency of approx. 0.75 Hz. For this case, the colour
is permanently set to blue.
-
When the push-button sensor is switched over into the programming mode for
commissioning or for diagnosis purposes, the LED flashes at a fast rate of about 8 Hz (cf.
"Commissioning" in the hardware description of this documentation). In this case too, the
colour is permanently set to blue.
In ETS, the operation LED can be switched on permanently for the purpose of orientation using
a parameter. Alternatively, it is possible to deactivate the operation LED permanently (OFF).
If several of the above states occur at the same time, the priority is as follows:
1. Indication of the programming mode.
The programming mode is cancelled automatically after any actuation.
2. The permanent states (on, off).
Page 22 of 39
Software "Standard TSM 110x11"
Functional description
