JUMO TYA 202, Operating Manual, Page: 85 / 108

2011-07-01/00561073 [SCR Power Controller TYA202] 83
7 Setup program
The setup program allows all data for the device to be conveniently set using
the PC and transmitted to the device.
As soon as the device is switched on, this configuration data is automatically
applied.
7.1 Hardware and software, minimum requirements
- PC Pentium III or higher
- 128 MB RAM, 16 MB free fixed disk memory
- CD-ROM drive
- Free USB interface, mouse connection
- Microsoft Windows® 2000/XP/Vista
7.1.1 Notes for Windows 2000/XP:
Users If the computer is accessed by more than one user, then the user who is
logged in must be the one who will subsequently be working with the program.
The user must have administrator rights for the installation of the software.
After installation, the rights can be restricted again.
In the event of non-observance of this information, correct and complete
installation cannot be guaranteed.
Software
versions The software versions of the device and setup program must be compatible,
otherwise an error message will appear.
h
After switching on, press on the device.
The device software version is displayed in the device information menu.
h
Click "Info" in the menu bar of the setup program.
H
To configure the power controller, simply connect the power controller
to the PC with the USB cable.
In the device In the setup program