JUMO dTRANS CR 02, Operating Manual, Page: 46 / 120

7 Commissioning
46
Basic setting
Temperature input
Administrator level/Password/Parameter level/Temperature input
Analog output
Administrator level/Password/Parameter level/Analog outputs/Analog output 1
Controller settings
See chapter 11.6.1 "Simple limit monitoring", page 78.
Start the basic settings, see chapter 6.7.3 "Basic setting", page 32
Diagrammatic overview, see chapter "Basic setting wizard", page 33.
Cell type 2-wire
Cell constant 0.01
Broken sensor detection Off
Operating mode Conductivity
Temperature compensation None
Temperature compensation source Temperature input
Unit MOhm × cm
Display format XX.xx
2nd measuring range Off
Supply frequency 50 Hz
Reinitialize device Yes
Temperature sensor Pt100
Signal source Main variable
Signal type 4 to 20 mA
Start of scaling 0.00 MOhm × cm
End of scaling 20.00 MOhm × cm