JUMO dTRANS CR 02, Operating Manual, Page: 30 / 120

6 Operation
30
6.5.9 Manual mode overview
Analog outputs (optional boards)
In this example, analog outputs 2 and 3 are working normally.
Switching outputs (PSU board and optional boards)
In this example relay output 2 is in Manual mode.
The instrument is in "normal display" mode
✱
Briefly press the or key (several times if necessary).
6.5.10 Hardware info
The instrument is in Measuring mode (normal display)
✱
Press and hold the and keys.
Alternating display
Manual mode can only be displayed if at least one output is in Manual mode.
For example Administrator level/Parameter level/Binary outputs/Binary output
1/Manual mode "Active" or "Simulation".
To return to Measuring mode:
press the
key or wait for a "timeout".
These displays are required for phone support.
EXIT
PGM