JUMO AQUIS touch P, Interface Description

Page: 11 / 52

11
4 The GSDML file
4 The GSDML file
4.1 General information
The GSDML file of a PROFINET device contains all the information required to provide your PLC engi-
neering system with the PROFINET IO functionality of the JUMO AQUIS touch P. It must be imported
into the engineering system so that the JUMO AQUIS touch P is available here for project planning.
Once the GSDML file has been imported, the relevant device and its IO functions can be integrated into
the programming system of your PLC projects.
4.2 Module description
4.2.1 Introduction to the module concept
The configuration of the IO data of JUMO field devices to be transferred via the PROFINET IO is defined
by the PROFINET modules of the device software.
The "DeviceStatusBlock" module of JUMO field devices has a defined configuration and cannot be
changed. It contains a range of cyclical IO data on the device status and the PROFINET start-up param-
eters for the JUMO field device concerned. In the project structure of the IO controller, this module is
always located in Slot 1 of JUMO IO devices. It cannot be relocated or removed.
The JUMO PC setup program can be used to create additional modules in the module configuration of
the device concerned. This involves device data being selected from the selectors in the JUMO field de-
vice and assigned to the corresponding IO items in the modules. The PC setup program can be used to
print the finished module configuration as a basis for the project planning of the IO controller. In the proj-
ect configuration of the IO controller, the modules to be transferred via the PROFINET-IO have to be as-
signed to the free slots of the JUMO IO device in the project structure of the IO controller. The IO items
of the inserted modules are then available for the programming of the IO controller. The assignment of
the JUMO field device data to the IO items of the individual modules is provided for the programmer in
the printed module configuration list.
 chapter 6 "Project planning", page 35
4.2.2 Modules
CAUTION!
All temperature values of the JUMO IO device are transferred in the unit "°C".
Misinterpretation of measured values of a JUMO IO device in the IO controller can cause errors in the
system control.
 Respect the unit for the transferred temperature values!
"DeviceStatusBlock" module of the JUMO AQUIS touch P
The "DeviceStatusBlock" module of JUMO IO devices has a defined configuration and cannot be
changed. It contains a range of cyclical IO data on the device status and the PROFINET start-up param-
eters. The IO controller is only able to read the data of this module. The tables below list the data in the
"DeviceStatusBlock" module of the JUMO AQUIS touch P.