Julabo MAGIO MS, Original Operating Manual, Page: 94 / 108

Appendix
94
in_par_10
Set control parameter Xpu of the subordinate controller (cascade
temperature control)
in_par_11
Set control parameter Tn of the cascade-controller
in_par_12
Set control parameter Tv of the cascade-controller
in_par_13
Set maximum permissible internal temperature InternMax in cascade
temperature control
in_par_14
Set minimum permissible internal temperature InternMin for cascade
temperature control
in_par_15
Set band limit upper in cascade temperature control
in_par_16
Set band limit lower in cascade temperature control
Auxiliary parameters System response
in_hil_00
Set actuating variable limit for cooling capacity (%)
in_hil_01
Set actuating variable limit for heating capacity (%)
ATC IN commands Parameter System response
ATC:INT:STATUS
?
Number of correction points used for internal
adjustment.
ATC:INT:POINTx
?
1 ... 10 Set values of the requested internal adjustment
correction point.
Example:
ATC:INT:POINT1?
Answer:
20.00;20.01
ATC:EXT:STATUS
?
Number of correction points used for external
adjustment.
ATC:EXT:POINTx
?
1 ... 10 Set values of the requested external adjustment
correction point.
Example:
ATC:EXT:POINT1?
Answer:
20.00;20.01