Julabo MAGIO MS, Original Operating Manual, Page: 6 / 108

6
8.7.3 Remote control device using RS232 interface ......................... 71
8.7.4 Remote control device using RS485 interface ......................... 71
8.7.5 Set EPROG input ..................................................................... 72
8.7.6 Set external setpoint values ..................................................... 73
8.7.7 Set up actuating variable .......................................................... 73
8.7.8 Request device status .............................................................. 74
8.8 Watchdog function ......................................................................... 74
8.9 Working with the programmer ....................................................... 75
8.9.1 Setting the timer ....................................................................... 75
8.9.2 Creating and editing a temperature control profile ................... 76
8.9.3 Import temperature control profile ............................................ 77
8.9.4 Export temperature control profile ............................................ 77
8.9.5 Delete temperature control profile ............................................ 77
8.9.6 Profile series setup ................................................................... 78
8.9.7 Activate programmer ................................................................ 79
8.10 Configure signal outputs ................................................................ 80
8.10.1 Set up Stakei outlet .................................................................. 80
8.10.2 Configure signal outputs of the REG/EPROG plug .................. 80
8.10.3 Configure alarm outputs ........................................................... 81
8.11 Activating stand-by input ............................................................... 81
8.12 Adjusting the temperature sensor (ATC) ....................................... 82
8.12.1 Adjust internal temperature sensor .......................................... 82
8.12.2 Adjust the internal temperature sensor - multi-point
calibration .............................................................................................. 83
8.12.3 Adjust external temperature sensor ......................................... 84
8.13 Device Reset ................................................................................. 84
9 Maintenance ...................................................................................... 85
9.1 Check safety symbols.................................................................... 85
9.2 Check the functionality of high temperature cut-off ....................... 85
9.3 Test the low liquid level safety function ......................................... 86
9.4 Replace detachable power cord .................................................... 86
9.5 Emptying ........................................................................................ 87
9.6 Clean device .................................................................................. 87
9.7 Device storage ............................................................................... 88
9.8 Technical Service .......................................................................... 88