JUKI APW-895NE, Instruction Manual

Page: 76 / 256

− 60 −
No. Item
Setting range
/
Edit unit
Initial value
Flap presser motion mode
Motion order of flap presser is selected.
- - -
△
From right From left
Right/Left at the
same time
Side where flap is
put
* When right and left are simultaneously actuated with customizing of
pedal setting, this parameter is neglected and the right and left are
simultaneously actuated.
Clamp foot down order change-over
Lowering order of clamp foot is selected.
- - -
From right From left
Right/left at the
same time
* When right and left are simultaneously actuated with customizing of
pedal setting, this parameter is neglected and the right and left are
simultaneously actuated.
Folding plate motion mode
“Return/No return” of folding plate when corner knife projects is selected.
- - -
Return No return
Binder pressure reduction rise prohibition
Pressure reduction rise of the binder at the time of jump feed is prohibited.
- - -
Pressure reduction
rise is prohibited
Pressure reduction
rise
Standing pedal continuous depressing timer effective/ineffective
change-over
Effective/ineffective of standing pedal continuous depressing
timer is selected.
* It is possible to set only when one-shot pedal is set.
- - - ※
Ineffective Effective
Standing pedal continuous depressing timer
When performing sewing product setting work with the standing pedal
depressed, the time interval when the respective devices operate in
order is set.
* It is possible to set only when one-shot pedal is set.
0.1 to 2.0
/
0.1 sec.
0.5 sec.
※
Condensation/back tack detailed setting
Detailed setting “Perform/Not perform” of pitch of condensation/back
tack section is selected.
- - -
Perform Not perform
※
. . . Item that is not displayed due to other setting state
△ . . . . The item which is not used in the standard condition of the APW-895NE.