JUKI APW-895NE, Instruction Manual

Page: 75 / 256

− 59 −
No. Item
Setting range
/
Edit unit
Initial value
Stacker timer 3
Motion time of material sweeping bar is set.
* It is possible to set only when clamp bar stacker option is used.
0.00 to
9.99
/
0.01 sec.
0.70 sec. ※
Stacker timer 4
Time to advance timing to release the sewing product by lifting clamp
foot is set.
When clamping a short sewing product, the amount to drop by tare is
adjusted.
*
It is possible to set only when clamp bar stacker option is used.
0.00 to
9.99
/
0.01 sec.
0.00 sec. ※
Sewing speed under the high-speed mode
Number of revolutions of lockstitch section is set.
* It is possible to set only when
sewing speed setting selection
is set to memory switch.
1000 to
3000
/
100sti/min
2500sti/min
※
Sewing speed under the low-speed mode
Number of revolutions of condensation and back tack sewing sections
is set.
* It is limited by sewing speed under the high-speed mode.
* It is possible to set only when sewing speed setting selection
is set to memory switch.
* In case of back tack sewing, the upper limit of number of revolutions
of the actual low speed is limited to 1,500 sti/min.
1000 to
2500
/
100sti/min
1500sti/min ※
Soft start, first stitch
Number of revolutions of first stitch at sewing start is limited.
500 to
2500
/
100sti/min
1500sti/min
Soft start, second stitch
Number of revolutions of second stitch at sewing start is limited.
500 to
2500
/
100sti/min
2500sti/min
Soft start, third stitch
Number of revolutions of third stitch at sewing start is limited.
500 to
2500
/
100sti/min
2500sti/min
Return speed of clamp foot
Return speed of clamp foot is set.
3 to 9
/
1
7
Thread breakage detection
With/without thread breakage detection is selected.
- - -
With thread break-
age detection Without thread
breakage detection
※ . . . Item that is not displayed due to other setting state