- 14 -
（
Figure 1.4.1
）
Instructions for remote:
(1) The handset is switched on: every time before the task the implemented, turn on
the remote first and then turn on the aircraft. Every time the flying task is completed,
turn off the aircraft and then power off the remote (In case the accidents occur.)
(2) The battery capacity of remote: the normal voltage of remote is 5.8V-7.2V; every
time you implement the flying task; make sure that the battery capacity of remote is
sufficient. In case of low battery, charge the remote battery in time.
(3) Arm flight: when the aircraft and the ground control station are normally powered on,
the aircraft is connected through the ground control station, and the ground control
station obtains the real-time data of aircraft. If parameter is normal , and HDOP value
≤
1, it can be unlocked by operating the rocker
to “
╮╭
” on the remote.
Note:
The take-off point of UAV (unmanned aerial vehicle shall be set in the open and
uncrowned site. During the flying, the operation range shall not be too great. Don't prod
other switch gears without permission during flying.
choose Yes. (Notice, you could also to SE mode)
