JSP FlexiTEMP 60, Manual

Page: 12 / 15

- 12 -
Flexible Sheath Resistance and Thermocouple Temperature Sensors FlexiTEMP
®
60
Code Cable insulation - wire insulation / shield / outer insulation / braiding
Ambient temperature of cable
2)
I1010 Silicone / - / silicone / - -50 to +200 °C - only for TC (not for "N")
I2010 FEP / - / silicone / - -50 to +200 °C - only for RTD and TC 1x"N" acc. cl. 2
I2C10 FEP / copper wire braiding / silicone / - -50 to +200 °C - only for RTD
I2C20 FEP / copper wire braiding / FEP / - -50 to +200 °C - only for RTD
I204N FEP / - / glass fibres / - / stainless steel wire braiding -50 to +200 °C - only for RTD 2- and 4-wire
I3030 PFA / - / PFA / - -200 to +260 °C - only for TC
I3C30 PFA / copper wire braiding / PFA / - -200 to +260 °C - only for RTD 2- and 4-wire and TC"K"
I404Z Glass fibres / - / glass fibres / galvanized steel wire braiding -20 to +350 °C - only for TC (not for "N")
I808N Ceramic fibres / - / ceramic fibres / stainless steel wire braiding -20 to +800 °C - only for TC 1x"K"
I9999 Other
Code Wire termination
00 Flying leads (standard)
01 Insulated pressing tube according to DIN 46228
02 Flat connector standard (plug) for single sensor, up to 220 °C - only for TC
03 Flat connector standard (plug) for double sensor, up to 220 °C - only for TC
04 Flat connector mini (plug) for single sensor, up to 220 °C - only for TC
22 Flat connector standard (plug) for single sensor, ceramic up to 650 °C - only for TC 1x"K"
24 Flat connector mini (plug) for single sensor, ceramic up to 650 °C - only for TC 1x"K"
09 Other
OPTIONAL ACCESSORIES
Code Versions for explosive atmosphere of gasses or dusts
Intrinsically safe version “Ex i“
(Ex) II 1/2G Ex ia IIC T6...Tx°C Ga/Gb
(Ex) II 1/2D Ex ia IIIC T85°C...Tx°C Da/Db
Code
Calibration in customer defined points, including certificate of calibration
KTE31A Resistance temperature sensor calibration in three points in range -40 to +600 °C
KTE41A Resistance temperature sensor calibration in four points in range -40 to +600 °C
KTE51A Resistance temperature sensor calibration in five points in range -40 to +600 °C
KTE32AA Thermocouple temperature sensor calibration in three points in range -40 to +660 °C
KTE42AA Thermocouple temperature sensor calibration in four points in range -40 to +660 °C
KTE52AA Thermocouple temperature sensor calibration in five points in range -40 to +660 °C
KTE32AB Thermocouple temperature sensor calibration in three points in range -40 to +1100 °C
KTE42AB Thermocouple temperature sensor calibration in four points in range -40 to +1100 °C
KTE52AB Thermocouple temperature sensor calibration in five points in range -40 to +1100 °C
KTE9 Other
Code Connectors, fuses of connectors and cables - only for TC
Z2
Counterpart of connector (plug), standard version, for single sensor, up to 180 °C
6)
Z3 Counterpart of connector (plug), standard version, for double sensor, up to 180 °C
Z4 Counterpart of connector (plug), mini version, for single sensor, up to 180 °C
Z32 Counterpart of connector (plug), standard version, for single sensor, ceramic up to 650 °C
Z34 Counterpart of connector (plug), mini version, for single sensor, ceramic up to 650 °C
PZ2 Counterpart of connector (rectangular panel plug), standard version, for single sensor, up to 180 °C
PZ4 Counterpart of connector (rectangular panel plug), mini version, for single sensor, up to 180 °C
PS Lock of connection connectors standard, for single sensor
PM Lock of connection connectors mini, for single sensor
PK1 Lock anti pull-up cable, for standard connectors for single sensor
PK2
Lock anti pull-up cable, for standard connectors for double sensor
PK3 Lock anti pull-up cable, for mini connectors for single sensor
Code Fixing shift pipe unions, holders and distance sleeve
UPS3M12
7)
Fixing shift pipe union for diameter 3 mm, connecting thread M12x1.5 (see data sheet No. 0126)
UPS4,5M12
7)
Fixing shift pipe union for diameter 4.5 mm, connecting thread M12x1.5 (see data sheet No. 0126)
UPS6M20
7)
Fixing shift pipe union for diameter 6 mm, connecting thread M20x1.5 (see data sheet No. 0126)
D3 Thermometer holder for wallmounting, material stainless steel (for head MA)
PV1 Distance sleeve diameter 8 mm, length 60 mm (only for code S71 - stem diameter 6 mm)
Code Transmitters for mounting on flange
P5310 H10 Transmitter with LHP protocol (see data sheet No. 0824)
P5310EN2 H10 Transmitter with LHP protocol, (Ex) II 3G Ex nA IIC T4 Gc (see data sheet No. 0824)
P5311 H10
Transmitter with LHP protocol with galvanic isolation (see data sheet No. 0824)
P5311EN2 H10 Transmitter with LHP protocol with galvanic isolation, (Ex) II 3G Ex nA IIC T4 Gc (see data sheet No. 0824)
P5311EI1 H10 Transmitter with LHP protocol with galvanic isolation, (Ex) II 1G Ex ia IIC T4-T6 Ga, (Ex) II 1D Ex ia IIIC T106°C Da
(see data sheet No. 0824)
P5315 H10 Precision transmitter with LHP protocol with galvanic isolation (see data sheet No. 2098)
P5315EN2 H10 Precision transmitter with LHP protocol with galvanic isolation, (Ex) II 3G Ex nA [ic] IIC T4 Gc (see data sheet No. 2098)
P5320 H10 Precision transmitter with HART protocol with galvanic isolation (see data sheet No. 0825)
P5320EN2 H10 Precision transmitter with HART protocol with galvanic isolation, (Ex) II 3G Ex nA [ic] IIC T4 Gc (see data sheet No. 0825)
P5320EI1 H10 Precision transmitter with HART protocol with galvanic isolation, (Ex) II 1G Ex ia IIC T4-T6 Ga, (Ex) II 1D Ex ia IIIC Txx°C Da
(see data sheet No. 0825)
Code Transmitters for mounting for rail
P5310 L10
Transmitter with LHP protocol (see data sheet No. 0824)
P5310EN2 L10 Transmitter with LHP protocol, (Ex) II 3G Ex nA IIC T4 Gc (see data sheet No. 0824)
P5311 L10 Transmitter with LHP protocol with galvanic isolation (see data sheet No. 0824)
P5311EN2 L10 Transmitter with LHP protocol with galvanic isolation, (Ex) II 3G Ex nA IIC T4 Gc (see data sheet No. 0824)
P5315 L10 Precision transmitter with LHP protocol with galvanic isolation (see data sheet No. 2098)
P5315EN2 L10 Precision transmitter with LHP protocol with galvanic isolation, (Ex) II 3G Ex nA [ic] IIC T4 Gc (see data sheet No. 2098)
P5320 L10 Precision transmitter with HART protocol with galvanic isolation (see data sheet No. 0825)
P5320EN2 L10 Precision transmitter with LHP protocol with galvanic isolation, (Ex) II 3G Ex nA [ic] IIC T4 Gc (see data sheet No. 0825)
P5320EI3 L10 Precision transmitter with HART protocol with galvanic isolation, (Ex) II 1G Ex ia IIC T4-T6 Ga, (Ex) II 1D Ex ia IIIC Txx°C Da
(see data sheet No. 0825)
Example of order: T1560 22 T7 S51 L100 KV 1000 I1 02 Z2 KTE32AB (-40, 500, 1000 °C) PS P1
• ... Ex stock version ° ... Marked version can be dispatched up to 5 working days (with calibration up to two weeks)
6)
… Plug connector is possible to connect to standard or mini male connector.
7)
… It is suitable only for non-flowing gas medium, free of mechanical stress including impacts and vibrations, where adjustable nominal length is required
and is impossible to use fixing pipe unions PT because of high temperature.
EI
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
°
•
•
•
•
•
°
°
°
°
°
•
•
•
°
°
°
°
°
•
•
•
•
•
•
•
•
°
°
•
•
•
•
•
•