JRC JMA-7710-6 Instruction Manual Download Page 71

Page: 71 / 314

3 – 10

3.2

3.2.8 Setting Color

This control is used to set the background colors of inside and outside the bearing scale as well as radar and

trail video colors in each mode (four modes of DAY1, 2 and NIGHT1 and 2).

The following colors can be set.

Element

Colors that can be set

BACKGROUND COLOR

Black, Blue

(within PPI)

BACKGROUND COLOR

Black, Sky blue

(outside of PPI)

TARGET COLOR

Yellow, Green, Orange

RADAR TRAILS COLOR

Sky blue, White, Green

Screen display colors can be set and stored independently in each screen color arrangement mode.

Recommended setting

Reduce the brilliance other than radar videos during nighttime to reduce glare.

Daytime setting

Nighttime setting

Brilliance of

Maximum brilliance of

Reduce the brilliance of

each element

each element (radar video = 2)

graphic and distance marker.

Background color

Black or Blue (optional)

Black

Radar video

Yellow

Green, Orange

Summary of Contents for JMA-7710-6



























































































































































































































































































































Search results

Summary of Contents for JMA-7710-6

Reviews:

Related manuals for JMA-7710-6

Brands by name

Popular brands

JRC JMA-7710-6, Instruction Manual

Search results

Summary of Contents for JMA-7710-6

Reviews:

Related manuals for JMA-7710-6

Brands by name

Popular brands