JRC JMA-7710-6 Instruction Manual Download Page 130

Page: 130 / 314

3 – 69

3.4

[Page 3] 1. VIDEO LATITUDE

• Select the gradation for displaying received signals on a screen.

• Use "NORMAL" as the standard condition and select "WIDE" in rainy weather.

• In "NARROW" mode, images of a close range are displayed in strong contrast.

NORMAL

: Setting in the standard use.

The display dynamic range varies according to the range.

Short range setting > medium range setting > long range setting

WIDE

: Setting when the radar is used in rainy weather.

The range is approximately doubled from that of "NARROW" in each range.

NARROW

: Obtains images of strong contrast by narrowing the dynamic range of a near range.

[Page 3] 2. VIDEO NOISE REJECTION

• Eliminates signals that are assumed to be noise and clutter from radar videos.

• Select "OFF" when displaying radar videos in analog mode.

• Select "LEVEL1" or "LEVEL2" when suppressing display of noise and clutter.

• Select "LEVEL1" or "LEVEL2" when using "BLUE" as the background color.

OFF

: Sets noise elimination to Off and displays all the signal levels.

Displays images in analog signal mode by floating echoes in the noise.

LEVEL 1

: Completely eliminates signals that are assumed to be undesired clutter (noise, rain/

snow).

Displays signals that cannot be definitely defined to be signals or undesired clutter.

LEVEL 2

: Completely eliminates signals (noise and clutter) that are assumed to be undesired

clutter (noise, rain/snow).

Eliminates signals that cannot be definitely defined to be signals or undesired clutter.

Displays signals that can be definitely defined as signals.

Page 3

1. VIDEO LATITUDE

NORMAL

WIDE

NARROW

2. VIDEO NOISE REJECTION

OFF

LEVEL1

LEVEL2

3. GAIN OFFSET

NUMERIC VALUE

4. XMIT REPETITION FREQUENCY

NORMAL

HIPOWER

ECONOMY

5. SMALL BUOY DETECTION

OFF

6. AUTO DR CONT

OFF

Summary of Contents for JMA-7710-6



























































































































































































































































































































Search results

Summary of Contents for JMA-7710-6

Reviews:

Related manuals for JMA-7710-6

Brands by name

Popular brands

JRC JMA-7710-6, Instruction Manual

Search results

Summary of Contents for JMA-7710-6

Reviews:

Related manuals for JMA-7710-6

Brands by name

Popular brands