JRC JMA-5912-6, Instruction Manual

Page: 390 / 466

9-5
Table 9-7 List of Conditions Messages
Message Class Description
ALR
No.
Battery Dead Warning The battery is dead.
Battery Low Warning The battery is weakening.
GPS (HDOP) Warning The HDOP level is increased (Decrease in the GPS accuracy.).
MON Test Warning Performance monitor is active.
No Battery Warning The battery had removed.
Scanner Rotating Warning The scanner is rotating (When transmitter is standby state.).
ALR No : Unique alarm number in ALR sentence and ACK sentence.
Table 9-8 List of Interswitch Alarms and Messages
Message Class Description
ALR
No.
Connection Masked INFO Inhibition of control / connection is set.
ISW (Data) Alarm ISW: No communication, data mismatched, or checksum error. 327
ISW Busy INFO Access to the ISW menu was made during interswitching.
ISW Complete INFO The switchover of the Interswitch ended normally.
ISW Error INFO The interswitch is disabled.
TXRX Standby INFO The scanner unit is in the standby mode.
ISW Straight INFO The interswitch is forced to change the connection into straight.
ISW Standby INFO The Interswitch recovered normally.
ISW Time Out INFO Failed in switching.
Master Range CHG INFO
The range of the own display unit has changed due to change in
the range of the master display unit.
Master Standby INFO The master display unit does not transmit any signals.
Pattern CHG Failed INFO Connection change failed.
Update ISW Software INFO
Tried to enter new TXRX function, when interswitch software
used old version.
ALR No : Unique alarm number in ALR sentence and ACK sentence.