JRC JMA-5912-6, Instruction Manual

Page: 81 / 466

2-16
2
2.3 Functions of Software Buttons
yy
Upper left of the display
①：
Range scale switching
To increase the observation range scale (maximum 96 NM), click + and to reduce the range
(minimum 0.125 NM), click - .
②：
Range rings display On / Off
The display of range rings are set to On / Off whenever this button is clicked.
When the display is set to On, the interval of the fixed range marker is displayed.
③：
Motion mode true / relative switching
The screen motion mode is switched whenever the button is clicked.
TM (true motion)
⇒
RM (relative motion)
⇒
TM
RM(R) indicates that the radar trails is a relative trail.
RM(T) indicates that the radar trails is a true trail.
④：
Off center switching
If this button is clicked, the cursor is moved, and the [ENT] key is pressed, the ship's position can be
moved to the cursor position. The moving range is within 66 % of the radius.
If the button is clicked for 2 seconds, the off-center is set to Off and the ship's position is returned to
the center of the screen.
⑤： Transmission / standby switching
At expiration of the pre-heat time after the power is turned on, Preheat changes to Standby .
Standby : Indicates a standby state. If this button is clicked in this state, the equipment is set to a
transmission state.
Transmit : Indicates a transmission state. If this button is clicked in this state, the equipment is set
to a standby state.