Keyboard Lock
The Keyboard Lock function enables you to enter a three digit
code, so that your model settings are safe-guarded against curios-
ity seekers who may tamper with your radio. This code can be
reset and stored as often as you like.
Note: Please write down your lock code and keep it someplace
safe. If you forget your code, the transmitter has to be sent to
Horizon’s service department to be unlocked.
Accessing and Utilizing the Keyboard Lock Function
To access the Keyboard Lock function, enter Code 88 at the code
number access selection or use the direct mode method.
The display will show as follows:
After you have accessed the Keyboard Lock function, an arrow
appears on the display screen under the first of three numbers.
This arrow serves as the cursor for your lock code selection.
Determine your three number lock code and touch the corre-
sponding numbers on the bottom of the LCD screen to enter
them.
Note: The cursor automatically advances to the next position
after a number is selected.
Touch the STORE key (that appears after the first numerical
selection) to store the selected lock code in the 10X’s memory.
Touch ENTER to exit the program.
If you want to remove the lock word at a later date, access the
Keyboard Lock function, Code 88, and enter 000 as the lock
code.
Once the lock code is entered into the transmitter’s memory, each
time you turn the transmitter on and touch ENTER to access the
Function Mode, the display will change to:
At this point, enter your lock code on the keypad at the bottom of
the LCD display. As you enter numbers, an asterisk appears
between the < > in the corresponding position. If you have
entered the correct code, the display changes to the code number
access selection screen. If you have not entered the proper code,
the 10X will not let you proceed any further.
10X MANUAL Airplane
67
8.28
Code 88
will appear
here after a number
is selected
Touch to
memorize data and
exit the timer program
Indicates feature to
be programmed
Cursor
Indicates lockword
Touch any number to enter it at the cursor
