Trace Rate
The purpose of the Trace Rate function is to simultaneously
adjust the servo travel of the channel selected, as well as any
channel(s) that are mixed to that channel. Trace Rate is available
on the three primary controls only—aileron, elevator and rudder.
This function is extremely helpful and can be used in the follow-
ing example:
Two servos are used for the rudder, with one servo being plugged
into the rudder socket in the receiver and the other servo being
plugged into an auxiliary channel. A programmable mix is then
used to mix rudder to the AUX channel being used. Adjust the
travel adjust for rudder and the travel adjust for AUX until the
servo throws are the same. Now to increase or decrease the throw
of both rudder servos simultaneously, adjust the trace rate value.
When using two aileron servos in flaperon, elevon or quad flap
mode, the aileron trace rate will affect both servos.
Accessing and Utilizing the Trace Rate Function
To access the Trace Rate function, enter Code 14 in the code
number access selection or use the direct mode method.
Your screen will appear as follows:
Move the appropriate stick in the desire direction to highlight the
percentage to be changed.
Touch the + key to increase or the - key to decrease the travel of
the selected channel and any channel being mixed to this channel.
The adjustment range is from 0–150%.
Note: In some instances, it’s possible to overdrive the limits of
the servo with a large value in Travel Adjust and Trace Rate.
10X MANUAL Airplane
17
Indicates feature
being programmed
Move the control
stick left or right to
move the cursor
to the desired
posiiton for that
channel
Touch the or key to increase (+) or
decrease (–) the travel of the selected
channel and any channel that is mixed to
that channel. Touch the CL key to return
values to the factory preset value
Touch to
memorize data and
exit program
8.4
Code 14
