joule Thermalstore 1.0, Installation Manual

Page: 12 / 68

Thermalstore
12
SYSTEM NOISE
Noise in pipework may occur as a result of expansion of pipework over joists or
where the pipe has been left touching other pipes or a part of the building
structure. Care must be taken to ensure that the pipework is correctly bracketed, is
not in tension or compression, and does not carry the weight of components such
as a circulation pump.
SETTING THE STORE TEMPERATURE
The JOULE Thermalstore temperature is set on the dual thermostat by the
competent person during the installation. The dual thermostat should be set to 70
° C. If you are heating w ater in the cylinder for the fi rst time, or if time controls have
been fi tted on the Thermalstore, the cylinder may take additional time to heat up.
Pipe Size (mm) Maximum Length (m)
10, 12 20
15, 22 12
28 8
35 and above 3
Inappropriate adjustments can lead to the damages in the system.
If any changes are made to the cylinder, the controls, the water and
power supply lines or the expansion relief components there is a
risk of steam escaping or rupture to the system.