background image

34

139587_05  GF 200 DV IPI  October 2015

Effective January 1, 2013

This warranty policy applies to gas products identified by Jøtul, 

Scan, and Atra trade names, as set forth below.

A. LIMITED FIVE YEAR WARRANTY - Cast Iron, Steel Doors, 

Surround Components, Firebox:

Jøtul North America Inc. (JØTUL) warrants, to the original retail 

purchaser, that those components of the Jøtul, Scan, or Atra 

Gas Stove or Fireplace specified above will be free of defects in 

material and workmanship for a period of five (5) years from 

the date of purchase.  This warranty is subject to the terms, 

exclusions and limitations set forth in the following text.

B.  LIMITED TWO YEAR WARRANTY - Burner, Burner Treatments, 

Firebox Panels:

 

JØTUL warrants, to the original retail purchaser, that those 

components of the Jøtul, Scan, or Atra Gas Stove or Fireplace 

specified above will be free of defects in material and 

workmanship for a period of two (2) years from the date of 

purchase.  This warranty is subject to the terms, exclusions, and 

limitations set forth in the following text.

C. LIMITED TWO YEAR WARRANTY - Enamel Finish: 

JØTUL warrants, to the original retail purchaser, the enamel 

finish on cast iron components of the Jøtul Stove or Fireplace 

Insert specified above against peeling or fading for a period of 

two (2) years from the date of purchase. This warranty is subject 

to the terms, exclusions and limitations set forth below.

D. LIMITED ONE YEAR WARRANTY - Gas & Electrical Components 

(controls, plumbing, valve, blower)

JØTUL warrants, to the original retail purchaser, that those 

components of the Jøtul, Scan, or Atra Gas Stove or Fireplace 

specified above will be free of defects in material and 

workmanship for a period of one (1) year from the date of 

purchase. This warranty is subject to the terms, exclusions, and 

limitations set forth in the following text.

JØTUL will repair or replace (including parts & labor), at its option, any 

of the above components determined by JØTUL to be covered by this 

warranty. You must, at your own expense, arrange to deliver or ship the 

component to an authorized Jøtul, Scan, or Atra dealer and arrange for 

pickup or delivery of the component after repairs have been made.  If, 

upon inspection, JØTUL determines that the component is covered by 

this warranty, the repair or replacement will be made as set forth above. 

This warranty is not transferable and is extended only to, and is solely 

for the benefit of, the original retail purchaser of the Jøtul, Scan, or 

Atra Gas Stove or Fireplace. This paragraph sets forth the sole remedy 

available under this warranty in the event of any defect in the Jøtul, 

Scan, or Atra Gas Stove or Fireplace.

The warranty period for any replaced component will be the remaining 

unexpired portion of the warranty period for the original component.

Please retain your dated sales receipt in your records as proof of purchase. 

EXCLUSIONS AND LIMITATIONS

NOTICE: This warranty is void if installation or service is performed 

by someone other than an authorized installer, service agency or gas 

supplier, or if installation is not in conformance with the installation 

and operating instructions contained in this owner’s manual or 

local and/or national fire and building regulations.  A listing of local 

authorized installers, service agencies and gas suppliers can be obtained 

from the National Fireplace Institute at http://www.nficertified.org/.  

This warranty does not cover the following:

1)   Repair or replacement of parts that are subject to normal wear and 

tear during the warranty period or to parts that may require replacement 

in connection with normal maintenance. These parts include gaskets and 

glass (except to the extent such parts suffer damage from thermal stress).

2)  Damage due to incorrect installations not in conformance with the 

installation instructions contained in this owner’s manual or local and/or 

national fire and building regulations.

3)  Damage due to service performed by an installer, service agency or gas 

supplier, unless otherwise agreed to in writing by JØTUL. 

4)  Labor or other costs associated with the repair of gas controls, 

plumbing, burners, log set, or sheet metal firebox beyond the warranty 

period.

5)  Damage caused by unauthorized modification, use or repair.

6)  Damage to enameled surfaces caused by improper operation or 

misuse, including use that is not in conformance with the operating 

instructions contained in this owner’s manual. Such damage can typically 

be identified by bubbling, cracking, or discoloration of the enamel finish.

7)  Costs incurred by travel time and/or loss of service.

8)  Damage incurred while the Jøtul, Scan, or Atra Gas Stove or Fireplace is 

in transit.

IN NO EVENT SHALL JØTUL, ITS PARENT COMPANY, SHAREHOLDERS, 

AFFILIATES, OFFICERS, EMPLOYEES, AGENTS OR REPRESENTATIVES BE 

LIABLE OR RESPONSIBLE TO YOU FOR ANY SPECIAL, INDIRECT, INCIDENTAL, 

CONSEQUENTIAL, PUNITIVE OR OTHER SIMILAR DAMAGES, INCLUDING, 

BUT NOT LIMITED TO, LOST PROFITS, LOST SALES, INJURY TO PERSON OR 

PROPERTY, OR DAMAGES TO A STRUCTURE OR ITS CONTENTS, ARISING 

UNDER ANY THEORY OF LAW WHATSOEVER.  ALL IMPLIED WARRANTIES, 

INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND 

FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE, ARE LIMITED IN 

DURATION TO THE LENGTH OF THIS WRITTEN WARRANTY.  EXCEPT AS 

EXPRESSLY SET FORTH HEREIN, JØTUL MAKES NO ORAL, WRITTEN OR 

OTHER WARRANTY WITH RESPECT TO JØTUL, SCAN OR ATRA GAS STOVES 

OR FIREPLACES.

Some states do not allow the exclusion or limitation of incidental 

or consequential damages, or limitations on the length of implied 

warranties.  Therefore, the above exclusions or limitations may not apply 

to you.  This warranty gives you specific legal rights, and you may have 

other rights, which vary from state to state. 

JØTUL reserves the right to discontinue, modify or change the materials used 

to produce the Jøtul, Scan, or Atra Gas Stove or Fireplace.  JØTUL shall have 

the right to replace any defective component with substitute components 

determined by JØTUL to be of substantially equal quality and price. 

The dollar value of JØTUL’s liability for breach of this warranty shall be 

limited exclusively to the cost of furnishing a replacement component.  

JØTUL shall not in any event be liable for the cost of labor expended 

by others in connection with any defective component.  Any costs or 

expenses beyond those expressly assumed by JØTUL under the terms of 

this warranty shall be the sole responsibility of the owner(s) of the Jøtul, 

Scan, or Atra Gas Stove or Fireplace.

No dealer, distributor, or other person is authorized to modify, augment, 

or extend this limited warranty on behalf of JØTUL.  NO MODIFICATION 

OR CHANGE TO THIS WARRANTY WILL BE EFFECTIVE UNLESS IT IS MADE IN 

A WRITTEN DOCUMENT MANUALLY SIGNED BY AN AUTHORIZED OFFICER 

OF JØTUL.

An authorized installer may have been provided with certain information 

related particularly to the Jøtul, Scan, or Atra Gas Stove or Fireplace; 

however, no authorized installer or other person who may service the 

appliance is an agent of JØTUL.  No inference should be made that JØTUL 

has tested, certified, or otherwise pronounced any person as qualified 

to install or service the appliance.  JØTUL shall not be liable or otherwise 

responsible for any error or omission by a person installing or servicing a 

Jøtul, Scan, or Atra Gas Stove or Fireplace.

If you believe your Jøtul, Scan, or Atra Gas Stove or Fireplace is defective, 

you should contact your nearest authorized Jøtul, Scan, or Atra dealer, 

who will process a warranty claim.  IN ORDER TO QUALIFY FOR WARRANTY 

COVERAGE, JØTUL MUST RECEIVE NOTICE OF A POSSIBLE DEFECT WITHIN 

SIXTY (60) DAYS OF THE DATE THE DEFECT IS FIRST DISCOVERED, OR 

REASONABLY COULD HAVE BEEN DISCOVERED.

This warranty is given by Jøtul North America, Inc.,  

55 Hutcherson Drive, Gorham, Maine 04038 USA 

Jøtul Gas Product  

Limited Lifetime Warranty

Summary of Contents for GF 200 DV IPI





































Reviews: