Jonsered FR 13, Workshop Manual

Page: 60 / 68

58
– English
FR 13, FR 2111
Hydrostatic Machines
N
Checking the Safety System
The rider is equipped with a safety system that
prevents starting or driving under the following
conditions.
It should only be possible to start the engine when
the cutting unit is in its raised position and the gear
stick or hydrostat pedals are in the neutral position.
The driver does not need to be seated in the
driver’s seat.
Make daily inspections to ensure that the safety
system works by attempting to start the engine
when one of the conditions is not met. Change the
conditions and try again.
Works
Does not work
Starter
Ignition System
Electrical System
Check that the engine stops if you temporarily
move out of the driver’s seat while the cutting unit is
lowered or the hydrostat pedals are not in the
neutral position.