24
CHAP.08 USE AND MAINTENANCE FOR THE USER
08.1
APPLIANCE OPERATIONS
The STOVE uses pellets as fuel, whose combustion is electronically controlled.
Pellets are taken from the storage hopper by the auger controlled by the gear motor and conveyed directly to the burn pot. They are
ignited by the hot air produced by the electric heating element (E) and aspirated into the burn pot by the centrifugal fan which is the same
that sucks up the fumes produced by combustion, expelling them to the rear part of the stove.
The room air tangential fan moves the air into the space on the back of the fireplace, where it is heated and then released into the
environment through the front grid. Located on the rear part of the stove, the hopper is filled by an openable lid located on the upper part
of the cladding. Pellets must be placed in the hopper with a shovel and not directly poured from the bag.
08.2
CONTROL UNIT
The electronic control unit controls all appliance functions and is controlled via a control display.
The electronic control unit features a timer function with customisable programmes and a user-friendly operating settings. Operations
are controlled by the ROOM PROBE standard installed, that can be prolonged to the installation room in a more appropriate position to
correctly measure room temperature. It can be used as an ambient thermostat, paying GREAT ATTENTION that the electrical connection
to the stove motherboard is CLEAN
The electric/electronic elements also include certain safety systems such as:
FUME TEMPERATURE PROBE
Fitted inside the fume exhaust fan
PRESSURE SWITCH
Connected to the fume exhaust fan
SAFETY THERMOSTAT
Triggers when temperature in the appliance is too high
The control display lets you use the following main functions:
•
Device start and stop
•
5 heating output level adjustment
•
Regulate the desired ambient temperature.
•
Optimise combustion.
•
Manually load pellets into the basket.
•
Manage the timed thermostat with several daily start ups, weekly start ups
and for week-ends.
•
Report any function irregularities.
•
Indicate the heating appliance’s operating mode.
