41
ENGLISH
When all surfaces are clean, remove the ash collection drawer
ad thoroughly clean even the latter (
F
ig
. 46
).
Finally, use a screwdriver to remove the cap that is located
under the ash drawer and thoroughly clean even this vain (
F
ig
.
47-48-49
).
Check all the interior, and then proceed with the reassembly of all components, paying attention to correct
repositioning, cleaning and physical state. Do not reassemble broken or damaged parts may cause undesired operation of
the stove.
WARNING
Correctly replace the cup with the two
placement points facing downwards. (
F
ig
. 50
).
WARNING
5.
Pellet tank opening and cleaning
Apply light pressure to lift the pellet hopper cover, pulling
upwards (
F
ig
. 51-52
).
Empty the pellet container every 500-1000 Kg of pellet burnt,
and check that no sawdust has accumulated on the bottom.
Clean the bottom of the container carefully.
After a long period of inactivity, empty the container and auger
completely.
F
ig
. 46
F
ig
. 47
F
ig
. 48
F
ig
. 49
F
ig
. 51
F
ig
. 52
F
ig
. 50
