30
Menu 06
XXX = SET
YYY = DISPLAY
User interface settings.
DISPLAY SETTINGS:
1. button 4
2. press button 6 to reach the SET DISPLAY page, press button
4 to confirm
Menu 07
XXX = LOAD
YYY = PELLET
Manual enabling for PELLET loading and to fill the load auger
LOAD PELLET SETTINGS:
1. button 4
2.
press button 6 to reach the LOAD PELLET page, press button 4 to confirm
3. press button 1 to enable the load process on the INITIAL LOAD page
4. press button 3 to suspend or wait for the load phase to be completed
5. press button 3 to exit, press repeatedly to return to the home page
6. on reaching the home page the CLEAN BASKET message will pop up. Press and hold button 3 for 2” to cancel the message.
INITIAL LOAD: loading must be performed if the auger is empty, after a NO PELLET alarm, or after maintenance or cleaning of the
container. Every time the manual PELLET load mode is enabled, the crucible MUST be emptied to create the correct conditions for the
stove start-up phase.
Menu 08
XXX = STATE
YYY = STOVE
Menu 8 consists of various pages that display information on
the stove conditions.
VIEWING STOVE STATUS:
1. button 4, press button 6 to reach the STATE STOVE page,
press button 4 to confirm.
2.
the first page displays:
a. fume temperature, first row
b. fume fan speed and output level, second row
c. pellet load time, third row
d. phase in progress, fourth row
3. press button 6 to change page
4. information for the assistance technician is provided from page 2 to page 5
5. press button 3 to exit, press repeatedly to return to the home page
How does the STAND-BY mode work?
The STD-BY allows the stove to be switched off when it reaches the temperature value set in section 4. The OFF Delta, is the temperature
differential between the SET ambient temperature and the actual ambient temperature. Therefore if, for instance, the SET ambient
temperature is 19°C, with an OFF Delta of 2°C and a switch-off delay of 5’, when the ambient temperature remains above 21°C for at least
5 minutes, the stove will switch off. It will remain in STD-BY until the ambient temperature reaches -1°C of the SET ambient temperature
which will trigger automatic start-up of the stove.
It is recommended to enable the STD-BY function only if the ambient conditions are favourable; excessive start-ups and switch offs during
the day reduces the performance of the stove and leads to wasting of energy.
3. press button 1 or 2 to enable or disable the buzzer on the SET BUZZER page, press button 4 to go to the next page
4. on the DELAY DISPLAY page, press button 1 or 2 to change the switch off delay value for the LCD display backlit function, press
button 4 to confirm
5. press button 3 to exit, press repeatedly to return to the home page
1
2
3
4
1
2
3
4
1
2
3
4
Menu 06
XXX
YYY
Menu 07
XXX
YYY
Menu 08
XXX
YYY
