Section 2: Installation
LED
Indicator
Description
Armed
ON Steady
[Red]
Partition is armed
Flashing
[Red]
System in Alarm. [Note: this LED does not flash for silent alarms or panic alarms]
Flashing
[Red]
Installer Walk Test ( Ready, Trouble and Arm LED’s flashing at same time) or sys-
tem test in progress ( Ready, Trouble and Arm LED’s flashing at same time)
OFF
Partition is disarmed or audible alarm annunciation is deactivated
Trouble
ON Steady
[Amber]
System trouble is present
Single flash
[Amber]
[*][2] System Trouble menu level 1
Two flashes
[Amber]
[*][2] System Trouble menu 2
Three Flashes
[Amber]
[*][2] System Trouble menu 3
Flashing
[Amber]
Access code is required to view Trouble menu, Installer Walk Test ( Ready,
Trouble and Arm LED’s flashing at same time) or a system test is in progress (
Ready, Trouble and Arm LED’s flashing at same time)
OFF
No system troubles
Wi-Fi Signal
Strength
ON Steady [Green] Strong Signal Connection
ON Flashing
[Green]
Wi-Fi active in WSA mode (for AP mode)
ON Steady
[Amber]
Radio active with weak signal connection
ON Flashing
[Amber]
Z-Wave is active in learn pair mode
On Steady [Red]
No Signal
Flashing
[Amber]
System Test ( AC, Ready, Trouble, Arm LED’s, WiFi Trouble, Cellular Trouble &
System Remote Status flashing at same time)
OFF
WiFi disabled
Cellular Sig-
nal Strength
ON Steady [Green] Strong signal connection
ON Steady
[Amber]
Weak signal connection
ON Steady
[Red]
No Signal or no connection
Flashing
[Amber]
System Test ( AC, Ready, Trouble, Arm LED’s, WiFi Trouble, Cellular Trouble &
System remote status flashing at same time)
- 9 -
