Section 4: Programming Options
Default:
3061 (0BF5)
Valid range:
0000 to 65535
CMS Ethernet 2 Domain Name
This information is provided by the central monitoring station
system administrator.
Default:
Blank
Valid range:
32 characters ASCII
CMS Cellular 1 Account Code
The account code is used by the central monitoring station
to distinguish between transmitters. Programming all 0’s or
all F’s causes a module configuration Trouble.
A cellular account code is necessary in order for the iotega
to communicate to the central monitoring station (if cellular
communication path is selected).
Default:
0000000000
Valid range:
0000000000 to FFFFFFFFFF
CMS Cellular 1 DNIS
The DNIS is used in addition to the account code to identify
the communicator module at the central monitoring station.
Default:
000000
Valid range:
000000 to 0FFFFF
CMS Cellular 1 IP Address
Enter the cellular receiver 1 IP address. This information will
be provided by the central monitoring station system admin-
istrator.
Note:
When a valid IP address has been entered, the cel-
lular receiver is enabled and will communicate events over
the cellular channel.
Default:
000.000.000.000
Valid range:
000.000.000.000 to 255.255.255.255
CMS Cellular 1 Remote Port
This section determines the port used by Cellular Receiver 1
for communication to the receiver.
Note:
Programming this section with 0000 will disable the
receiver.
Default:
3061 (0BF5)
Valid range:
0000 to 65535
CMS Cellular 1 APN
The Access Point Name (APN) determines the cellular net-
work that the communicator will connect to. This information
is available from the network carrier.
Note:
When a SIM card with a custom APN is used, the unit
will not have access to the Internet. DLS and remote flash
can still be done if a valid public APN is programmed.
Default:
Blank
Valid range:
32 characters ASCII
CMS Cellular 1 Domain Name
This information is provided by the central monitoring station
system administrator.
Default:
Blank
Valid range:
32 characters ASCII
CMS Cellular 2 Account Code
Default: 0 Not in valid range
Valid range: 0000000001 to FFFFFFFFFE
The account code is used by the central monitoring station
to distinguish between different transmitters. This account
code is used when transmitting signals to the central mon-
itoring station receiver.
Note:
Programming this section as all 0’s or F’s will cause a
module configuration trouble (yellow LED = 12 flashes).
Note:
A cellular account code is necessary in order for the
iotega to communicate to the central monitoring station (if
cellular communication path is selected).
Default:
0000000000
Valid range:
0000000000 to FFFFFFFFFF
CMS Cellular 2 DNIS
The DNIS is used in addition to the account code to identify
the communicator module at the central monitoring station.
Default:
000000
Valid range:
000000 to 0FFFFF (first digit not used)
CMS Cellular 2 IP Address
Enter the Cellular receiver 2 IP address. This IP address will
be provided by the central monitoring station.
Note:
When a valid address has been entered, Cellular
Receiver 2 is enabled and will communicate events over the
cellular path.
Default:
000.000.000.000
Valid range:
000.000.000.000.to 255.255.255.255
CMS Cellular 2 Remote Port
Enter the cellular receiver 2 IP address. This IP address will
be provided by the central monitoring station.
Note:
When a valid address has been entered, cellular
receiver 2 is enabled and will communicate events over the
cellular path.
Default:
3061 (0BF5)
Valid range:
0000 to 65535
CMS Cellular 2 APN
The APN determines the cellular network that the com-
municator will connect to. This information is available from
the network carrier.
Note:
When a SIM card with a custom APN is used, the unit
will not have access to the Internet. DLS and remote flash
- 23 -
