Introduction
The IQ Hardwire PowerG Wired to Wireless Converter converts existing hardwired zones to PowerG
wireless zones.
There are two models, the PG8HRDW8 and PG9HRDW8, and each provide eight hardwired zones
and four programmable outputs. This document describes how to mount the enclosure, wire zones,
connect the battery, enroll devices, and troubleshoot.
Note:
Only PG9HRDW8 is UL and ULC listed. For UL and ULC installations, use this device only
in conjunction with compatible wireless receiver and control panel combinations, model Qolsys
IQPanel2 and IQPanel4.
Before you begin, make sure that the kit contains the following items:
•
The plastic enclosure containing the IQ Hardwire PowerG Wired to Wireless Converter
•
The transformer
•
The hardware pack
The following table outlines panel compatibility
Table 1: Panel compatibility
Module
Supported by
v1.2
IQ2 plus panel v2.7.0 / IQ4 v4.1
PG8HRDW8 and PG9HRDW8 IQ Hardwire PowerG Wired to Wireless Converter Installation Manual
6
