Fire Alarm or CO Alarm Bells Silenced
You can silence Fire alarms or CO Alarms by entering a valid access code. The message "Fire
Alarm/Bells Silenced" or "CO Alarm/Bells Silenced" is displayed on the LCD keypad connected
to the corbus. The message will not be cleared until all the fire zones zones are restored on
system.
Figure 13: Keypad terminals
Callout
Description
1
R terminal
2
B terminal
3
Y terminal
4
G terminal
5
Not supported
Example:
When you install multiple keypads and modules, wire keypads using the same partition on the
same module to improve keypad performance. Keypads on partition one should be wired into
module one, and keypads on partition two should be wired into module two.
PG8HRDW8 and PG9HRDW8 IQ Hardwire PowerG Wired to Wireless Converter Installation Manual
24
