Small Battery Drive II User Manual DePuy Synthes 5
Synthes Universal Battery Charger II (05.001.204).
Special auxiliaries such as cleaning brushes and Depuy
Synthes oil are available for cleaning and servicing the
system. No oils from other manufacturers must be used.
Only Depuy Synthes oil (519.970) must be used.
Lubricants with other compositions can cause jamming, can
have a toxic effect or can have a negative impact on the
sterilization results. Only lubricate the power tool and the
attachments when clean.
Depuy Synthes recommends the use of the specifically
designed Graphic Case (60.550.60, 60.550.200 &
60.550.210) and of the specifically designed Washing Basket
(68.001.610) to sterilize and store the system.
Combination of Medical Devices
Depuy Synthes has not tested the compatibility with devices
produced by other manufacturers and assumes no liability in
such instances.
Storage and transport
Only use the original packaging for dispatch and transport
as otherwise damage may occur. If the packing material is
no longer available, please contact your local Depuy Synthes
office.
Please refer to the regulations for transporting Li-Ion
batteries when returning them to the Depuy Synthes Service
Center. The Universal Battery Charger II (UBC II) with a
firmware version of at least 17.2 will allow the user to
charge the Small Battery Drive II (532.103) Li-Ion battery to
30% state of charge in order that it can be shipped by
aircraft in accordance with the regulations.
Please note that if the Small Battery Drive II (532.103) Li-Ion
battery is damaged it cannot be transported by aircraft
cargo. For detailed instructions, please refer to the UBC II
Instructions for Use or contact your DePuy Depuy Synthes
Representative.
Do not store or transport batteries haphazardly in a box or
drawer where they may short-circuit each other or be short-
circuited by other metal objects. This can damage the
batteries and generate heat, which can cause burns.
For storage and transport environmental conditions please
refer to the section “System Specification” on page 51.
Servicing
Warning:
This system requires regular maintenance
service, at least once a year, in order to maintain its
functionality. This service has to be performed by the
original manufacturer or an authorized site. The
manufacturer assumes no responsibility for damage
resulting from improper operation, neglected or
unauthorized maintenance.
Warranty / Liability
The warranty for the tools and accessories does not cover
damage of any kind resulting from improper use, damaged
seals or improper storage and transport. The manufacturer
excludes liability for damage resulting from repairs or
maintenance carried out by unauthorized sites.
The manufacturer assumes no responsibility for damage
resulting from improper operation, neglected or
unauthorized maintenance.
Warnings:
•
To prevent injuries, the mode switch of the drive
unit should always be in the locked position (off
position) when inserting or removing attachments,
cutting tools and battery casing.
•
The aseptic transfer technique is detailed in
chapter “Use”. Alternatively, for battery 532.103,
please follow the guidelines provided in the
STERRAD/ V-PRO sterilization guide. No other
sterilization methods are allowed.
•
The battery must never be autoclaved, washed,
rinsed or dropped. This would destroy the battery
with possible secondary damage (explosion). Only
use original Depuy Synthes batteries.
•
Should the machine drop on the floor and have
visible defects, do not use it anymore and send it to
the Depuy Synthes Service Center.
•
If a product drops on the floor, fragments may split
off. This represents a danger for the patient and
user as:
–
these fragments may be sharp.
–
unsterile fragments may enter the sterile field or
hit the patient.
Precautions:
•
Install the battery pack just before use in order to
prevent unwanted discharge of battery capacity.
Furthermore, it is recommended that the battery is
placed into the charger immediately after surgery.
•
The tool must only be operated with a fully charged
battery. Therefore, ensure that the battery is
charged in good time.
•
Should the system have corroded parts, do not use
it anymore and send it to the Depuy Synthes Service
Center.
Summary of Contents for DePuy Synthes Small Battery Drive II
Page 2: ......
