Small Battery Drive II User Manual DePuy Synthes 27
Positioning the saw blade
The saw blade can be adjusted in the desired position
vertically and horizontally at an angle of 45º (see the
earlier sections “Positioning the saw attachment” and
“Changing the saw blade”).
Using the oscillating saw attachment
The saw blade must already be oscillating when the saw
is applied to the bone. Do not apply strong pressure to
the saw blade as this will delay the cutting process and
the saw teeth will catch in the bone. Optimal saw
performance is achieved by moving the power tool
slightly back and forth in the plane of the saw blade so
that the blade oscillates beyond the bone on both sides.
Very precise cuts can be made when the saw blade is
guided steadily. Imprecise cuts arise due to used blades,
excess pressure or jamming the saw blade.
Instructions for handling the saw blades
Depuy Synthes recommends using a new blade for each
operation to ensure that the saw blade is optimally
sharpened and clean. The following risks are associated
with used blades:
•
Necrosis caused by excessive heat build-up
•
Infection caused by residue
•
Extended cutting time due to poor saw performance
Figure 4
Summary of Contents for DePuy Synthes Small Battery Drive II
Page 2: ......
