Small Battery Drive II User Manual DePuy Synthes 49
If the recommended solutions do not work, send the power tool to your local
Depuy Synthes service center.
For further technical questions or information on our services, please contact
your Depuy Synthes representative.
Problem
Possible causes
Solution
The Kirschner wire is inserted
in the handpiece and cannot
be moved forward.
The Kirschner wire was inserted from
the rear.
Lock the machine by turning the mode
selector switch to OFF. Remove the
attachment, hold the drive shaft opening
down and shake out the Kirschner wire.
Handpiece or attachment
becomes excessively hot.
Cutting edges of the tool are blunt.
Replace the tool.
Battery casing jams when
inserting or removing from
drive unit.
The battery casing seal has become dry
from repeated cleaning.
Clean and lubricate according to care
and maintenance guidelines.
The battery casing knob is
difficult to turn.
The locking mechanism needs to
be lubricated.
Clean and lubricate according to care
and maintenance guidelines.
The knob mechanism needs to
be lubricated.
Clean and lubricate according to care
and maintenance guidelines.
The triggers are difficult to
move.
The trigger shafts need to be lubricated. Lubricate the trigger shafts as described
on page 39.
It is difficult to couple the
battery casing to the machine.
The battery casing release buttons need
to be lubricated.
Lubricate the battery casing release
buttons as described on page 39.
Battery casing lid is difficult to
open and close
Sealing ring has not been lubricated
Clean and lubricate according to care
and maintenance guidelines
Visible physical damage on
items
Battery was accidentally reprocessed
Replace battery
Drive unit, attachment, battery casing,
sterile cover was dropped
Replace damaged items. Send damaged
items to Depuy Synthes Service Center
Drive unit continues to run
after releasing trigger
Trigger is jammed by residue
Immediately turn mode switch to locked
position (off position) or remove the
battery casing
Warning:
Clean and lubricate
trigger according to care and
maintenance guidelines
Drive unit is defective
Immediately turn mode switch to locked
position (off position) or remove the
battery casing
Send drive unit to Depuy Synthes Service
Center
Battery is faulty
Staff negligence
Replace battery. Do not use a faulty or
damaged battery, as this may damage
the power tool. Test the status of the
battery using the Universal Battery
Charger II.
Summary of Contents for DePuy Synthes Small Battery Drive II
Page 2: ......
