A
Small Battery Drive II User Manual DePuy Synthes 25
Burr Attachment (05.001.187)
The Burr Attachment is size M. It can be used with Burrs
for Burr Attachments of the Electric Pen Drive and Air
Pen Drive systems. It is compatible with burr types M
and L, but it is recommended to use burrs of size M.
Changing burrs
1. Lock unit.
2. Turn the release sleeve for burrs
A
until it engages
in the UNLOCK position and remove the tool.
3. Insert the new tool as far as possible, turn it
slightly until it locks in place and then turn the
release sleeve for burrs into the LOCK position
until it engages. With burrs of size M, the burr is
correctly clamped when the marking M on the
burr shank is no longer visible.
Information on handling burrs
Depuy Synthes recommends using a new sterile burr for
each operation. This prevents health risks to the patient.
Used burrs present the following risks:
•
Necrosis due to excess heat
•
Longer cutting time due to reduced performance
of the burr
Warnings:
•
The attachments may only be used with the burrs
intended for this purpose or one size above
(attachment is size M, please therefore only use
burrs of size M or L).
•
Always wear personal protective equipment (PPE)
including safety goggles when handling with the
Small Battery Drive II system.
Precaution:
Cutting tools must be cooled with
irrigation fluid to prevent heat necrosis. For this
purpose, irrigate manually.
Summary of Contents for DePuy Synthes Small Battery Drive II
Page 2: ......
