Small Battery Drive II User Manual DePuy Synthes 29
Large Oscillating Saw Attachment (532.026)
The Large Oscillating Saw Attachment is a specially
designed saw attachment for performing a crescentic
saw cut, e.g. while performing a Tibial Plateau Leveling
Osteotomy in the canine proximal tibia. The attachment
is approved for use in both humans and animals.
Inserting the saw blade
Insert the saw blade in the saw blade coupling and
tighten the screw in the saw blade with the key
(532.027) that was delivered with the attachment or use
a T15 StarDrive screwdriver (e.g. 314.115).
Check that the saw blade is correctly in place and
properly tightened.
Mounting the saw attachment
Make sure that the mode switch of the handpiece is in
the OFF position and that the locking sleeve on the saw
attachment is set to the unlock position . Insert the saw
attachment in any position into the attachment coupling
of the handpiece until it locks into place. To prevent
vibrations during operation and to increase the sawing
capacity, additional manual tightening of the attachment
onto the handpiece is required. Turn the locking sleeve
into the lock direction until you feel that the coupling
pins engage into the handpiece (approx. half a revolution).
Precautions:
•
Avoid applying high pressure onto the saw blade.
•
The Large Oscillating Saw Attachment may only
be used with the handpiece in the ON mode. Do
not operate the Large Oscillating Saw attachment
in the oscillating drilling mode ( ).
Removing the saw attachment
Turn the locking sleeve to the unlock position
before
pushing both release buttons on the handpiece.
Summary of Contents for DePuy Synthes Small Battery Drive II
Page 2: ......
