VCA PARAMETERS (MOD MODE) | 31
VCAS 1-4
VCAs
Figure 44. VCA Panel
VCAs 1-4
Solaris has four VCAs, each hardwired to accept an input
signal from either its corresponding filter or Insert FX mod
-
ule (filter or Insert FX with the same number).
VCA Parameters (Main Mode)
Figure 45. VCA Main Mode
The VCA type can be set to
linear
,
logarithmic
, or
sigma
(s-curve, used on the Minimoog). The VCA type controls
the response of the amplifier to control signals.
The
Boost
control is an emulation of an OTA circuit, or “soft
distortion”, taken from the original Minimoog filter emula
-
tion. It was moved into the amplifier section so that is could
be used with any filter type. Setting its value at around
70
or more will result in a more “analog” sound.
VCA Parameters (Mod Mode)
Figure 46. VCA Mod Mode
The VCA modules have two modulation inputs.
Source1
on Mod Mode, page 1 modulates the amplifier’s level, and
Source2
on
Mod
Mode, page 2 modulates the amplifier’s
pan position.
Summary of Contents for Solaris
Page 1: ...User Guide Version 1 ...
