KNOB ACCELERATION | 17
REAR PANEL CONNECTIONS
Rear Panel Connections
The illustrations below show the rear panel connections of the Solaris. The illustration is too long to fit on a single page of
the manual, so it is represented by Figure 17, which shows the leftmost connections on the rear of the unit, and Figure 18,
which shows the rightmost connections.
Figure 17. Leftmost rear panel connections
Figure 18. Right most rear panel connections
PEDALS
The pedal inputs are described in “Home Menu” on page 45.
SPDIF
Optical S/PDIF capable of 48kHz in/out when in Master mode. Solaris will operate at 96kHz in Slave mode.
ANALOG OUT
The analog outputs are described in “Output” on page 38.
ANALOG IN
See “Processing External Signals” on page 23 for more information about the analog inputs.
MIDI
Solaris provides standard MIDI In, Out, and Thru connectors. MIDI configuration is covered in “MIDI Menu” on
page 44.
COMPUTER
Solaris can transmit and receive MIDI signals over the USB port.
CF CARD
CompactFlash port. See “Quick Start” on page 9 for more information about the CF card.
POWER
Power Switch.
POWER
Jack for the external power supply. The power supply that ships with Solaris has the following specs:
Input: 100-240V ~1.0A max 50-60Hz (groundless)
Output: +12V DC 2.5A, 30W max
(2.5 x 5.5 x 11.0)mm center positive
Table 1. Rear panel connections
Summary of Contents for Solaris
Page 1: ...User Guide Version 1 ...
