92
5.5.4.5-7
5.5.4.5-10
5.5.4.5-6
5.5.4.5-9
5.5.4.5-8
The OPTIMIZATION 13 screen (Fig. 5.5.4.5-9) is
displayed.
Fig. 5.5.4.5-9 OPTIMIZATION 13
START? is displayed on the screen.
•
If necessary, go back by pressing menu key F5.
•
Press the START key.
A measuring run is performed.
The OPTIMIZATION 14 screen (Fig. 5.5.4.5-10) is
displayed.
Finish weight minimization / optimization
Fig. 5.5.4.5-10 OPTIMIZATION 14
If the wheel running conditions are optimal, the following
codes can be displayed:
H0 Wheel running conditions cannot be improved by
optimization.
H1 Further optimization not recommended but feasible.
H2 Weight minimization is recommended, optimization
can achieve no further improvement.
If optimization has been performed:
The pictograph OK shows that optimization was carried
out correctly and has been completed successfully.
If minimization has been performed:
The pictograph OK shows that minimization was carried
out correctly and has been completed successfully.
To return to the BALANCING screen:
•
Press menu key F1 (Fig. 5.5.4.5-10) or F6 (Fig.
5.5.4.5-12).
To perform minimization:
•
Press menu key F5 (Fig. 5.5.4.5-13).
