84
Settings changed, but not saved in the permanent
memory will be reset to the previous value when the
machine is turned off.
The possible changes of modes and the necessary
inputs are described in the following.
5.5.3.1 List of modes of operation
Setting modes of operation as recommended
See § 5.2.1 Switching on the machine.
0* = No action
1 = Factory-adjusted modes of operations are set (state
1 is only shown briefly)
The selected mode of operation can be transferred to
the permanent memory.
Saving modes of operation in permanent memory
0* = No storage
1 = Data are stored in the permanent memory
Store in the permanent memory – a three-tone signal
is given to acknowledge acceptance.
If the mode stored in the permanent memory is to be
changed, enter the desired state (e. g. on or off) for
the mode in question and transfer it into the permanent
memory.
Language selection
Selection of menu language. Several languages are
available, e.g. Danish, English, German.
Volume of the audible signals
Scale of volume 0 to 100 (low - high).
Factory-adjusted to 50.*
The volume is not changed before the ESC key is
pressed for quitting the mode.
The selected mode of operation can be transferred to
the permanent memory.
Resolution of the unbalance amount readings
Selecting the resolution of unbalance readings in 1or
5g, or 0.05 or 0.25 oz increments.
Normal* = 5 g (0.25 oz) increments
Fine = 1 g (0.05 oz) increments
The selected mode of operation can be transferred to
the permanent memory.
Suppression of minor unbalance amount readings
Off = Suppression off
On * = Suppression on
The selected mode of operation can be transferred to
the permanent memory.
Setting threshold value for unbalance suppression
in g
Selecting the limit (threshold) value for suppression of
minor unbalance readings in Grammies, or ounces.
The unit (g. or oz) depends on the settings made under
“Measurement limit of the unbalance amount readings”.
