Page 2
IMPORTANT SAFETY INSTRUCTIONS
When using this equipment, basic safety precautions should always be followed,
including the following:
1.
Read all instructions.
2.
Do not operate equipment with a damaged power cord or if the equipment has been
damaged - until it has been examined by a qualified authorized service technician.
3.
If an extension cord is used, a cord with a current rating equal to or more than that
of the machine should be used. Cords rated for less current than the equipment
may overheat. Care should be taken to arrange the cord so that it will not be tripped
over or pulled.
4.
Always unplug equipment from electrical outlet when not in use. Never use the
cord to pull the plug from the outlet. Grasp plug and pull to disconnect.
5.
To reduce the risk of fire, do not operate equipment in the vicinity of open
containers of flammable liquids (gasoline).
6.
Keep hair, loose fitting clothing, fingers and all parts of the body away from moving
parts.
7.
Adequate ventilation should be provided when working on operating internal
combustion engines.
8.
To reduce the risk of electric shock, do not use on wet surfaces or expose to rain.
9.
Do not hammer on or hit any part of the control panel with weight pliers.
10. Do not allow unauthorized personnel to operate the equipment.
11. Do not disable the hood safety interlock system or bypass the intended operation.
12. Use only as described in this manual. Use only manufacturer’s recommended
attachments.
13. Always securely tighten the wing nut before spinning the shaft.
14. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact
resistant lenses, they are NOT safety glasses.
15. Balancer is for indoor use only.
SAVE THESE INSTRUCTIONS
Summary of Contents for VPI SYSTEM II
Page 2: ......
Page 27: ...NOTES ...
