John Bean VPI SYSTEM II, Operation Instructions Manual

Page: 15 / 28

Page 13
John Bean VPI System II Operators Manual
NOTE: It must be very clear that the feature works assuming that some residual imbalance
can be left on the wheel. The tire shop will save weight, but wheels will be balanced with a lower
degree of accuracy.
Optional Weight Miser
™ ™
™ ™
™
Operation
1. The Optional Weight Miser
™ ™ ™ ™ ™
function is enabled or disabled by pressing the “F” button twice
on keyboard. When the “F” button is pressed twice, the machine displays “SAV ON” for one
second. Then machine displays the weights in Optional Weight Miser mode.
2. Press the “F” button twice again, the machine displays “SAV OFF” and returns to the normal
balancing mode.
3. The weight savings are stored in memory to be recalled later.
4. The Operator can check the total savings of the Optional Weight Miser
™ ™
™ ™ ™
by entering “Func-
tion Code” F89 as described below.
(a) Enter F89, the machine displays "SAV ING" for 1 second.
(b) The display will then show the total amount weight saving in grams or ounces depend on
the setting of the weight unit.
(c) The maximum total amount of saving weight can be displayed is 999,999 gram ( = 1 ton)
or 999,999 oz ( = 62,500 lbs).
(d) Next, Press the F button once, the machine displays "Ent Pri ce ".
(e) Rotate the shaft to enter the unit price of weight in cents, such as .75 cents per ounce.
(f) Pressing the F button once again machine displays the total a mount money saved by
Optional Weight Miser function.
(g) The value is rounded to the nearest dollar (if weight unit is ounce) or Euro (if weight unit is
grams).
(h) If continuously press F button, machine displays "Erase", " 1 1 1", " 2 2 2", " 3 3 3" and
finally "CLE AN SAV". At that time the memory is reset to 0.
(i) Press [STOP] at any time to exit F89.