John Bean VPI SYSTEM II Operation Instructions Manual Download

Page: 7 / 28

Page 5

John Bean VPI System II Operators Manual

1.3 VPI System II SPECIFICATIONS

Computerized digital wheel balancer for car, light truck
wheels.

Weight Imbalance Accuracy

.1 oz / 2 grams

Weight Placement Resolution

± .7 degrees

Weight Imbalance Resolution:
Roundoff Mode

.25 oz / 5 grams

Non-Roundoff Mode

.05 oz / 1 gram

Max. Shaft Weight Capacity

120 lbs / 54 kg

Max.Tire Diameter

44" / 1117 mm

Rim Width Capacity

3.0"-20" / 76 mm - 508 mm

Rim Diameter Capacity

8"-30" / 152 mm-762 mm

Balancing Cycle Time.

7 seconds or less

Shaft Speed at calculation

<100 RPM

Electrical

230vac, 1ph, 50-60Hz, 3A

Required Work Area

62” x 67” (1574 x1702 mm)

Shipping Weight, complete

325 lbs/147kg

Shipping Dimensions

52.75”h 41.5”w 37”d

Machine Dimensions

54”h 51”w 48.5”d

Actual Weight with Accessories

309 lbs / 140 kg

Operating Temperature Range

32-122F / 0-50C

1.4 FEATURES

ACCURACY

• Weight placement accuracy is ± .7°
• Weight imbalance accuracy to 2 grams.
• Self test check with every power up cycle.
• Fast operator calibration.
• Pre-programmed Error Codes indicate procedural

errors or safety concerns.

SPEED and DURABILITY

• Automatic distance and diameter entry. Simply touch

the SAPE arm to the wheel, the distance and diam
eter parameters are automatically entered.

• Quick clamp speed nut reduces wheel mounting time.
• Captured back spring eliminates having to handle the

backing spring.

• Quick cycle time.
• Automatic recalculation if weight positions are

changed. No need for re-spinning the wheel.

• Common 40 mm diameter mounting shaft.
• Weight pocket storage tray.
• Easy-to-Read Data display.
• Easy weight tray access.

SOFTWARE VERSATILITY

• Both dual weight Dynamic and single weight Static

capability.

• Tone-at-Top

™

features simplifies weight imbalance

location

• Match Balance program for reducing weight required.
• Built-in spin counter for monitoring balancer

productivity.

• Service code access to all Balancer electronic func-

tions for fast, easy diagnosis.

• Operator selectable roundoff mode.
• 5 Aluminum Modes
• Alu-S mode
• Hidden Weight (Spoke) mode
• Split Weight mode
• Optional Weight Miser

™

Feature reduces placed weight

and saves shop inventory expense.

• Ounce / Gram toggle from front panel
• Multiple operator feature allows several operators to

recall wheel parameters.

Summary of Contents for VPI SYSTEM II





























Search results

Summary of Contents for VPI SYSTEM II

Reviews:

Related manuals for VPI SYSTEM II

Brands by name

Popular brands

John Bean VPI SYSTEM II, Operation Instructions Manual

Search results

Summary of Contents for VPI SYSTEM II

Reviews:

Related manuals for VPI SYSTEM II

Brands by name

Popular brands