Joab EcoDrive Operation And Maintenance Manual Download Page 30 | Manualshive

Page: 30 / 73

background image

The following functions are included as standard with EcoDrive Hook-Lifts. For further inform-
ation, click on the respective function.

1. Intelligent Pump Control - IPC

2. EcoDrive Pressure Control - EPC

3. Fast Drive System - FDS

4. Smartlock System - SLS

5. EcoDrive Load Holding - ELH

6. Electronic Cylinder Damping - ECD

7. Electronic Speed Control- ESC

8. EcoDrive Tipper Mode ETM

9. Fast Lowering System - FLS

10. Friction Free Drive - FFD

11. Tipper Safety System - TSS

12. Trailer Safety Tipper - TST

13. Trailer Fast Lowering System - TFS

14. Decentralized Hydraulic System - DHS

Intelligent Pump Control - IPC

The EcoDrive system determines when the pump needs to be activated. When the pump is
turned on, it will only operate when power is required, as determined by the system.

EcoDrive Pressure Control - EPC

The system is always operated using optimal hydraulic pressure. This is based on the function
that is being operated. The system is self-calibrating and can work from 50 bar to 400 bar.
Optimized pressure control allows for reduced response time.

Fast Drive System - FDS

Intelligent, stepless, fast drive, ensures that the body is moved backwards at optimal speed. The
system senses the weight of the body's load and adjusts the speed accordingly, to guarantee
smooth and fast operation.

Smartlock System - SLS

The hydraulic lock is operated steplessly. The system's sensors detect when the lock is open.
When the lock closes, the system ensures that the body is centered, automatically.

EcoDrive Load Holding - ELH

EcoDrive's load-holding-valve allows for control of the hook lift in a completely new way. The
new system uses all available kinetic energy to control a load. This in turn saves up to 70% in
energy savings. The load-holding-valve also has integrated safety features. An example of
these features is the fast-closing hydraulic valves that are used for emergency stops. There are
also less components in EcoDrive's valve system, which in turn increases reliability.

Electronic Cylinder Damping - ECD

Integrated electronic end position adjustment for all cylinders. This guarantees smooth and
responsive control at end positions, when operating the hook-lift.

22

Operation | EcoDrive Standard Functions

EcoDrive manual: 13300 Edition 1 | 2019-01-31

«
...
28
29
30
31
32
...
»

Summary of Contents for EcoDrive










































































Reviews:

No comments

Related manuals for EcoDrive

Brand: MAC TOOLS Pages: 30

Brand: ICP DAS USA Pages: 2

Brand: WAGO Pages: 20

INCA STD 13-16-19

Brand: M.J. MALLIS GROUP Pages: 28

Brand: Gude Pages: 7

Brand: Lincoln Electric Pages: 15

Brand: HEIDENHAIN Pages: 64

Brand: Toparc Pages: 38

Brand: iCONNECT Pages: 20

Brand: Air Liquide Pages: 23

Reflex Wheel-X 50 050 0030

Brand: Carson Pages: 52

Brand: Measurement Computing Pages: 50

Brand: National Instruments Pages: 16

Brand: Lincoln Electric Pages: 36

CYL-P-LUG Series

Brand: Vestil Pages: 7

Premier Verical Lift

Brand: harbor master Pages: 9

PRO-POWER VIMSF100

Brand: VITO Pages: 48

Brand: National Instruments Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands