Joab EcoDrive Operation And Maintenance Manual Download Page 32 | Manualshive

Page: 32 / 73

background image

Tipper Safety System - TSS

The auxiliary-lifting-arms are controlled using weight based damping. Integrated flow dis-
tribution components ensure that the body is tipped and lowered safely. The auxiliary-lifting-
arms retrieve and move the body to its loaded position in a smooth and precise manner.

Trailer Safety Tipper - TST

TST monitors the speed of the vehicle. If it detects that the vehicle is moving faster than 50 km/h
with a raised tipper on the trailer, the tipper will automatically be lowered. The system also
ensures that there is no pressure in the trailer tipper's outlet on the vehicle.The valve's position is
also monitored for increased safety.

With TST, a trailer can be lowered even if the hydraulic pump is switched off. There is no need to
turn the pump on.

Trailer Fast Lowering System - TFS

The trailer tipper function is up to 50% faster when in lowering mode. Optimized hydraulics allow
the oil to flow faster. This in turn allows the tipper to lower faster. There is no return flow that
would otherwise restrict the lowering function.

Decentralized Hydraulic System - DHS

EcoDrive's hydraulic system is modular. This has enabled a 30 % reduction in the number of
hoses required, which in turn reduces the risk of damage to hoses. It also provides faster
response times for certain functions. The modular approach makes it very easy to expand the
system. New modules, such as a plough, or other external functions, can quickly and easily be
added at a later stage.

EcoDrive Optional Functions

Listed below are the optional functions that can be ordered in addition to the standard functions,
that are listed above. For further information, click on the respective option.

1. Position Memory System - PMS

2. Fast Lowering System Plus - FLS+

3. Fast Tipper System - FTS

4. Fast Drive System Plus - FDS+

5. Service Online System - SOS

Position Memory System - PMS

This function allows for the recording of shunting and tipping positions. Whenever PMS is active,
the hook-lift will automatically stop at the saved position for shunting or tipping.

Set the Shunting Position

1. Operate the hook-lift in shunting mode so that it is at the desired position and stop.

24

Operation | EcoDrive Optional Functions

EcoDrive manual: 13300 Edition 1 | 2019-01-31

«
...
30
31
32
33
34
...
»

Summary of Contents for EcoDrive










































































Reviews:

No comments

Related manuals for EcoDrive

Brand: Balboa Pages: 74

Brand: Paton Pages: 17

Brand: Riello Pages: 2

Brand: Grundfos Pages: 27

Brand: CTE Pages: 130

Brand: Launch Pages: 62

Brand: ZKTeco Pages: 56

Brand: Invacare Pages: 45

Brand: American Panel Pages: 18

Brand: ICP DAS USA Pages: 8

ISaGRAF VP-2117

Brand: ICP DAS USA Pages: 75

Brand: Kontron Pages: 2

Brand: APS Resource Pages: 28

Brand: Danfoss Pages: 36

Brand: WARPP Pages: 11

Brand: Blichmann Engineering Pages: 18

Brand: HandyTrac Pages: 20

Brand: LOTOS Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands