Joab EcoDrive, Operation And Maintenance Manual

Page: 20 / 73

User Interface
Shown opposite is an overview of the user inter-
face.
The areas marked with a white rectangle on the
screen are programmable. The user can set
which functions are placed there. These func-
tions are activated by pressing the cor-
responding buttons: F1–F4 and the UP/DOWN
arrows. For further information on how to set
these functions, refer to
"Function Buttons", on
page 15 below.
The function icons (F1–F4 and the UP/DOWN
arrow buttons) that are displayed in the user
interface is dependent upon which page set-up
is selected. There are five different page set-
ups. To switch between these press either the left or right arrow button located below the
screen. For more information see
"Page Set-Ups", on page 14 .
All other icons that are displayed on the screen (not the user defined functions) simply provide
feedback to the user regarding the status of the hook-lift, which page set-up is active, and active
functions, such as lights on etc.
See "Icon Definitions" , below for a list of the icons and their function.
Icon Definitions
Provided below is a list of the functions available in the user interface and their meaning. Note,
not all functions listed below are activated for all installations. Some of the functions are optional
extras, these are marked with an asterisk (*).
Functions that can be selected for the programmable areas (F1–F4 and the UP and DOWN but-
tons) are coloured white. All other buttons (orange and green) simply provide feedback to the
user as to whether or not they are active.
Icon Function Icon Function
Night mode
Deactivate FFD
2
. Read NOTE 2
below.
Load light -ON Tip trailer - UP*
Table 1: User interface – icon description
12
Operation | CBW controller
EcoDrive manual: 13300 Edition 1 | 2019-01-31