Joab EcoDrive, Operation And Maintenance Manual

Page: 36 / 73

Buttons 1–8 are analogue. Pressing these buttons harder will cause the operation that it con-
trols to happen faster. Alternatively, these buttons can be set to simply have an ON/OFF func-
tion.
Buttons 9–12 are digital and used for simple functions, such as the operation of a spreader flap.
The buttons 1–12 are multi-functional. That is, they can have more than one function assigned
to them. See
"Function Mode" below.
Display
The display at the top of the controller displays information regarding the current function mode
selected and the function currently activated. In the example shown, the truck symbol indicates
that function mode_1 is selected and that the current function being operated is the hydraulic-
lock.
LEDs
Each button has an LED located to the left or right of it. In the example shown, the LED to the left
of button 2 is illuminated green. These LEDs are used to provide information regarding current
status of the active operation. Listed below is table describing what each relevant LED means.
Button LED Green LED Meaning
2 Tip DOWN fully completed. Either lock or unlock the hydraulic-lock.
4
Extending Section fully retracted. The centre lock is open and it is possible
to tip the body in shunting mode.
8 Hydraulic lock is OPEN. It is not possible to tip the body UP.
12 Function mode_2 elected.
11 & 12 Function mode_3 selected.
Table 7: LEDs and their meaning
Emergency Stop
The large red emergency STOP button located at the bottom of the controller is used to stop the
hook-lift in an emergency. To activate it, simply push it in. It must be pulled out to start the con-
troller.
Function Mode
Buttons 1–12 are multi-functional. They can have three functions assigned to them. These are
related to the function mode selected for the controller (Function_1, Function_2, or Function_
3).
28
Radio Controllers | Operation
EcoDrive manual: 13300 Edition 1 | 2019-01-31