Joab EcoDrive, Operation And Maintenance Manual

Page: 22 / 73

NOTE
1
: The above functions: Automatic flap - VEHICLE and Automatic flap - TRAILER can be
operated without the hydraulic pump being turned ON. Simply keep the icon pressed for 10
seconds to activate them without turning the pump on.
NOTE
2
: FFD must be activated when working with bodies that have dowel pins that are used to
anchor the body onto the vehicle. If it is not active, damage can occur. See "Friction Free Drive -
FFD", on page 23 for further information.
Page Set-Ups
The user interface can display one of five main page set-ups, each configured with user defined
functions. In addition, a page that displays information regarding the position of the hook on the
hook-lift can also be displayed. See
"Hook Positioning", on page 15 below. The pages available
are listed below. The page set-up that is active is displayed in the bottom right-hand side of the
screen with one of the following icons (see
"User Interface", on page 12 ).
Icon Description Icon Description
Vehicle setup_1 Lighting setup
Vehicle setup_2 Snow plough setup
Trailer setup Hook positioning display
Table 2: Page set-ups
To switch between these page set-ups, simply press either the left or right arrow button below
the display.
The number of menu page set-ups that are accessible via the left and right arrow buttons can
be configured as required (1–5 page set-ups). In the example shown below, three page set-up
are selected, these are shown with a green rectangle below them. The three active page set-
ups will be visible when the left/right arrow buttons are pressed.
To configure which of the page set-ups are available when the left and right arrow buttons are
pressed, follow the procedure below:
1. Press and hold down the OK button and
press either the left or right arrow button at
the same time for a few seconds.
The screen will then display the menu page
options as shown.
14
Operation | CBW controller
EcoDrive manual: 13300 Edition 1 | 2019-01-31