Joab EcoDrive, Operation And Maintenance Manual

Page: 19 / 73

11
Operation
This chapter explains the operation and control of the EcoDrive Hook-Lift using the CBW con-
troller, that is located inside the cab.
The hook-lift can also be controlled with the use of JOAB's radio controller. Radio controllers are
an extra option. For further information see
"Radio Controllers", on page 27 .
CBW controller
The CBW controller has both a display and control
stick, as shown, and is used to control all functions of
the hook-lift.
Certain functions, such as the operation of the
hydraulic pump, can be installed on the cab instru-
ment panel, either in addition or separate from the
CBW controller, as required.
The CBW controller has the fallowing main parts:
1. Emergency Stop
2. User Interface
3. Control stick
4. Mounting bracket
5. Screen lock screw
The emergency stop button is used in case of an emergency. Once pressed, all functions of the
hook-lift that could cause injury are disabled. To restore operation the system must be restar-
ted.
The user interface of the CBW controller has a 2.8 inch colour display. It is configurable. It is pos-
sible to display one of five different page set-ups. Each page set-up can have six user defined
functions, such as turning lights on. For further information see
"Page Set-Ups", on page 14 .
The control stick is used to control the basic functions of the hook-lift, such as tipping. For
detailed information regarding its function, refer to
"Control Stick Function", on page 16 .
The mounting bracket is used to mount the unit inside the cab. Normally it is mounted onto the
driver's A-post. However, it is also possible to mount it onto the driver's right arm rest. This is
ideal for snow ploughs.
EcoDrive manual: 13300 Edition 1 | 2019-01-31